<< Home   Nanochemitek

 > AS series

 > PS series

PCS series >>

 > ZQ series




Nano-Glo® PCS Fluorescent Pigments possess better tinctorial strength ,exceptional brightness, excellent heat stability with stronger solvent and bleeding resistance than conventional thermoset fluorescent pigments commercially available. They can be vastly applied to the organic solvent systems of non-polar and weak polar (i.e. aromatic hydrocarbons, acetate esters, fatty alcohols). Suggesting to apply to paper coatings.

 Physical Properties & Chemical Nature
 Product forms:  Solid Dye Solution in a Thermoset Resin

Specific Gravity (Density):


Average Particle Size:

Decomposition Point:


Oil Absorption:

 +50g/100g pigment

 Important Notice

Certain metal ions are known to cause color changes and loss of brightness with fluorescent colorants. Studies have shown that plastic processing additives containing ^free ̄ zinc, magnesium, calcium and iron will cause deleterious color effects when used in a plastic resin system containing PCS Pigment. If a metal containing additive must be used, it should be thoroughly tested to ensure the color stability of the PCS Pigment.

PCS Pigments are essentially non-toxic and contain no constituent heavy metals, safe to be applied in finished product such as graphic arts.

 Available Colors
PCS -10
Lemon Yellow
PCS -16 Cerise
PCS -11 Green PCS -17 Pink
PCS -12
Orange Yellow
PCS -18 Rose
PCS -13 Orange PCS -19 Blue
PCS -14
Red Orange
PCS -20 White
PCS -15 Orange PCS -21 Violet

Color Chart




The product should be stored, handled and used in accordance with good industrial hygiene practices and in conformity with legal regulations.


All recommendations for use of our products, whether given by us in writing, verbally, or to be implied form the results of tests carried out by us are based on the current state of our knowledge.
Notwithstanding any such recommendations the Buyer shall remain responsible for satisfying himself that the products as supplied by us are suitable for his intended process or purpose. Since we cannot control the application, use or processing of the products, we cannot accept responsibility therefore, The Buyer shall ensure that the intended use of the products will not infringe any third party's intellectual property rights. we warrant that our products are free from defects in accordance with and subject to our general conditions of supply


Nanochemitek (Yangzhou) Corp.


Shanghai Export Liaison Office


victor.chen@nano-glo.com |   Office: +86-21-33737287