<< Home     Nanochemitek

 AS series >>

 > PS series

> PCS series

 > ZQ series





® AS Fluorescent Pigments Have superior brightness, best tinctorial strength and more fluorescent when compared to other thermoplastic fluorescent  pigments commercially available. They are recommended for a wide range of applications where resistance to strong solvents is not needed, They perform well in a system based on aliphic and some aromatic hydrocarbons. Also usable in water systems where prolonged shelf-life is not required. Recommended for such applications as A-type gravure inks, vinyl plastisols, organisols, vinyl coated fabric, paper coatings, screen inks, paints, plastics and crayons with melt temperatures less then 190.Also suitable in the coloring of the injection molding of polyolefins less than 190.

 Physical Properties & Chemical Nature
Product forms:  Solid Dye Solution in a Thermoplastic Resin

Specific Gravity (Density):


Average Particle Size:


Softening Point:


Decomposition Point:


Oil Absorption:

 +48g/100g pigment


 Available Colors
AS-11 Pink AS-17 Yellow
AS-12 Cerise AS-18 Green
AS-13 Red AS-19 Blue
AS-14 Red Orange AS-20 Lemon Yellow
AS-15 Orange AS-21 Rose
AS-16 Orange Yellow AS-22 Violet
Color Chart
 Use in Plastic
Polyethylene (PE,HD/LD) +
Polypropylene (PP) +
Polystyrene (PS) +
Polyyurethane (PU) +/-
Ethylene-vinylacetate (EVA) +/-
Polyvinylchloride (PVC flexible) +/-
+    : Recommended
+/- : Recommended, should be tested in individual resins
 Important Notice
AS Pigments are essentially non-toxic and contain no constituent heavy metals, safe to be applied in finished product such as toys to comply with currently available international regulations (refer to note) on heavy metal concentrations.

1. US ASTM F 963:96a (4 3 5) Standard Consu
mer Safety Specification on Toy Safety.
2. EU European Standard on Safety of Toys, EN71part
:1994(including amendment A1:2000)-Migration of Certain Elements

The product should be stored, handled and used in accordance with good industrial hygiene practices and in conformity with legal regulations.


All recommendations for use of our products, whether given by us in writing, verbally, or to be implied form the results of tests carried out by us are based on the current state of our knowledge.
Notwithstanding any such recommendations the Buyer shall remain responsible for satisfying himself that the products as supplied by us are suitable for his intended process or purpose. Since we cannot control the application, use or processing of the products, we cannot accept responsibility therefore, The Buyer shall ensure that the intended use of the products will not infringe any third party's intellectual property rights. we warrant that our products are free from defects in accordance with and subject to our general conditions of supply


Nanochemitek (Yangzhou) Corp.


Shanghai Export Liaison Office


victor.chen@nano-glo.com |   Office: +86-21-33737287